Bl Working

Two is better than one

When I first starting using the new, Veritas Dual Marking Gauge late last fall I wasn’t sure how often I’d actually use both sides of the gauge at once. Up until that point I used a single type gauge. Through the first week in use I generally used only one of the adjustable rods and it wasn’t until I made it a mental point to try using both rods that the fog lifted.
Two is truly better than one. Once I trained my brain to think about the dual settings I found myself using them both all of the time. Well at least whenever it was called for in the work.
For stringing, this thing is the cat’s meow. Set the desired width and scribe both sides of the line. Perfect.
For grooves and dovetails as well as most of my mortise and tenon work, the dual marking gauge is the way to go. It saves me a step or two and with all things  that need to be measured, that saved step usually means one less step to make an error.
The gauge has a large reference surface that makes scribing lines easy and effective with large brass screws to lock things in place.

Just recently, Veritas introduced a small accessory to this already excellent tool.   The optional shaft clamp. This little clamp slides over the rods and will lock a setting in place. This was extremely useful just the other day when I was setting some stringing into a few furniture components. The stringing was all the same width but the offset from the edge changed.
The shaft clamp held the width of the cutters in place while I adjusted the offset from the gauge body. Nice!
It’s always the little details that make good tools great and Veritas has done it again with the Dual Marking Gauge and optional Shaft Clamp.
Try one out for yourself and you’ll wonder how you ever got along with only one!
Cheers~